Fast Draw Speed-Timer 3000
This timer was designed to bring an effective, inexpensive practice timer to the sport of Fast Draw. It can be used by itself, or in combination with one or more remote displays to allow for highly visible results.
Features:
- Three operational modes:
- Self start mode where there is a two second delay, then a flashing light signal to simulate the "Shooter on the line, Shooter Set" command before going into the random two to five second delay. This mode is designed for individual practice.
- Timer Operator mode where a timer operator gives the "Shooter on the line, Shooter Set" command and releases the button to start the random two to five second delay.
- Instant On mode where the timer operator determines when the light will come on. This is perfect for use in walking events, or other instances where instant timer start is required.
- Bright 3-bulb LED light signal powered by the timer. Comes with 35-foot cable. This light can be placed behind the plexiglass of a wax target, or in place of the light on a balloon target.
- The timer records the shots through a sound sensor built into the unit - no need for external wiring to targets
- Shot Times (the overall time from the start signal)
- Split Times between each shot fired (cross-over time for Doubles)
- Shot Numbers (the total numbers of shots fired)
- Review of each shot fired in a string
- Displays all the above information on the timer readout in .001 increments, and can transmit the overall time to a remote Shot Display if desired (purchased separately)
- Powered by one 9 V DC alkaline battery (not included)
- Built-in belt clip to attach to your gunbelt. This is a great location to use the unit during individual practice using the self start mode.
- Check the Fast Draw picture page for more details and photos
- View the full Fast Draw timer instructions
|
|
|
|
Click on a picture to view a large version in a new window
Note about the timer picture at the right: The top picture shows the time after someone fired a single shot of 0.341. The bottom picture shows what the display would look like if someone fires 2 shots in "Doubles", with the total time being .602 for both shots (the timer says "2 shots", plus shows the .261 split cross-over time after the .341 was fired on the first shot).
|
|
$206
(+ $12.00 shipping)
|
Fast Draw Multi-Function Remote Shot Timer Display
This display can be used in conjunction with the Fast Draw timer above to give you an additional method of seeing your times. It's a great option when practicing with other shooters, or when doing demonstrations so the spectators can get full visual feedback of the times being shot. The times are wirelessly transmitted to the display via radio signals, so it's very easy to set up.
Features:
- Displays information from our transmitter equipped Fast Draw timers up to 100 feet away
- Second mode allows for the display to be connected to a micro-switch. In this mode the display starts timing when the hand-held unit transmits the start command (when the light comes on), then stops when the micro-switch is released.
- In the two Fast Draw modes mentioned above this unit will display times to the 1/1000 of a second (3 decimal places)
- Additional modes allow this display to act like a standard remote display unit, displaying times to the 1/100 of a second (2 decimal places)
- Outside Dimensions: 14 1/2" x 6 /3/4" x 1 5/8"
- LCD Area: 13" x 4 5/8"
- LCD Numbers: 2" wide x 4" tall
- Weight: 2 1/2 pounds (1 Kilo)
- Power by standard 9 volt alkaline DC battery (not included) or 110 volt power supply (included)
- Operating Temperature Range: -10C to 40C
- Color: yellow
Please see the Action Shooting or Fast Draw instructions
for operating details
|
|
|
|
Click on a picture to view a large version in a new window
|
|
$365
(+ $25.00 shipping)
|
Fast Draw Speed-Timer 3000 (RF)
and Multi-Function Remote Display
This timer and display combination gets you on your way to shooting with full visual feedback for yourself, other shooters and spectators. It combines the Fast Draw Speed-Timer 3000 with the Multi-Function Remote Display that uses 4-inch high digits for easy viewing.
Please see the feature lists above for details on the Fast Draw Speed-Timer 3000 (RF) and Fast Draw Multi-Function Remote Shot Timer Display.
|
Click on the picture to view
a large version in a new window
|
|
$531
(+ $25.00 shipping)
|
Wax Target Pick-up Unit
This unit is to be used with the large multi-function display unit to connect it directly to a wax target. With the display unit's mode switch set to "5", the display unit will start timing when the Fast Draw timer sends the start command via radio signal (when the light comes on), and will stop when the target it hit with a wax bullet.
The pick-up unit comes with two holes to use with nuts and bolts to connect it to the wax target, and a fifteen foot cable to connect to the multi-function display unit. Make sure to place the display unit far enough from the wax target so as not to hit it with a stray bullet, or better yet, protect it with a plexiglass cover.
Please see the Ultimate Fast Draw Configuration page for more details
|
$30
(+ $5.00 shipping)
|
Light Unit for Fast Draw Timer
This is the same 3-bulb light unit that comes with the Fast Draw timer. If you break your original light unit, or want to have lights on two targets utilizing a Y-connector, this is the unit you'll want to purchase.
|
$57
(+ $7.50 shipping)
|
Y-Connector for Fast Draw Timer
This Y-Connector cable allows you to operate two light units with a single Fast Draw timer. The Y-Connector includes a 25-foot cable to the splitter, then two 15-foot cables to go from the splitter to each light unit to place on the targets.
Please see the Ultimate Fast Draw Configuration page for details of Y-Connector in use.
|
$39
(+ $6.50 shipping)
|
Spare Cable (Timer to Light)
This is the same 35-foot cable that comes with the Fast Draw Timer and Light system. If you lose or damage the cable for your Fast Draw timer you can get this one as a replacement.
|
$25
(+ $9.00 shipping)
|
3-Function Timer Carry Case
The 3-Features of this Case are:
- To protect your Speed-Timer 3000 when not in use. Fold the large flap over the timer, securing the bottom of the flap with Velcro.
- To attach to your belt for secure and easy access while recording shots. Just fold the flap back, secure via the Velcro at the bottom back of the case, and slip it on your belt.
- To attach to your wrist, for "Hands Free" use while recording shots. Fold the flap around your wrist and attach to the Velcro on the bottom of the case.
Note: When ordered with a timer or other item this case will ship for free, otherwise shipping is $5 when the case is ordered by itself.
See the Main Pictures Page for a better view.
|
Click on a picture to view a
large version in a new window
|
|
$22.50
(free shipping if
ordered with timer)
|
Tripod Mount for Display
Use this mount to place your Display unit on a camera tripod for easy viewing by spectators, competitors and scorekeepers. This comes with the standard display feet permanently attached to a strip of plexiglass that has a standard camera tripod mount affixed in the middle.
|
Click on a picture to view a
large version in a new window
|
|
$25.50
(free shipping if
ordered with display)
|
Westerner Speed Timers offers timing units for use in Fast Draw practise. These timers are built with a modular design that allows you to use them individually or in combination with one or more display units to fit your shooting needs. Check out the 
